Binding parts for polycarbonate (lexan) plates

The binding elements ensure proper closure and sealing of the edges of the panel. In order to prevent the entry of moisture, dust and insects into the panels, we recommend using a self-adhesive aluminum strip on the top of the board. In addition, we recommend the use of low modular neutral silicone, which, unlike ordinary silicone, prevents cracking and polycarbonate damage. At the lower part of the board, we recommend using a vapor permeable edge strip to reduce condensation and prevent dust and insect penetration into the board. The pass-through band must be covered with the final “U” profile and sealed with modular neutral silicon on the top of the plate. To connect the panels lengthwise, we recommend using a ” H ” profile, taking care of the compound details to prevent cracking of the plate due to temperature (shrinkage and spread).

 

Profiles

  • “U” PROFILES width 2100 mm and thickness 4, 6, 8, 10 and 16 mm
  • “H” PROFILES width 6000 mm and thickness 4, 6, 8, 10 I 16 mm
  • “F” PROFILES width 6000 mm and thickness 10 I 16 mm

 

Following materials

  • silicon for polycarbonate
  • screws, sheets and pliers for plates of 10mm and 16mm thickness
  • perforated self-adhesive tape (25/50, 38/50, 50/50 mm)
  • aluminium self-adhesive tape (25/50, 38/50 mm)

 

Gallery
Our Clients
  • alca
    allianz

  • atlantic grupa
    auto hrvatska

  • badel
    belupo

  • cinestar
    caparol

  • carlsberg
    cedevita

  • cocacola
    crveni kriz

  • dukat
    erste

  • elektrokontakt
    feroterm

  • franck
    gradska plinara zagreb

  • hrt
    hlutrija

  • hrvatske autoceste
    ina

  • inkea
    jamnica

  • kras
    ledo

  • lidl
    lola

  • medvescak
    mlinar

  • meggle
    medika

  • plinacro
    schindler

  • vivas
    vincek

  • wurth
    zdenka

  • zet
    zoo hobby

  • holding